RoomScope now loads IR data from CSV, MAT, and TXT files
RoomScope’s Room Analyzer tool can now load impulse response data from csv, txt, and MAT files saved within the app.
» Read moreTag: frequency response
RoomScope and IOScope measure longer IRs and use 64-bit FFTs
RoomScope 1.2 and IOScope 2.3 arrived in the iOS App Store this week. Both apps now support impulse response measurements up to 16 seconds long and use double precision (64-bit) FFTs in their measurements.
» Read moreFrequency Response Measurement with SignalScope Pro 3 (Mac)
Although SignalScope Pro does not include the Dual FFT Analyzer tool, found in Electroacoustics Toolbox, it is still equipped to perform basic frequency response measurements. This tutorial focuses on using SignalScope Pro’s FFT Analyzer and Signal Generator tools to measure the frequency response of your audio interface.
» Read moreFrequency Response Measurement with Electroacoustics Toolbox 3
One of the most powerful tools in Electroacoustics Toolbox is the Dual FFT Analyzer, which is capable of measuring system transfer functions and even indicating the quality of the measurement.
» Read moreAre you looking for a measurement microphone for your iPhone?
Some time ago, I was made aware of the i436 measurement microphone from MicW. It looked like exactly what was needed to turn any iOS device into a quality sound level meter, or acoustical analysis tool, that you could truly carry around in your pocket, but it was limited in its utility by that pesky low-end roll-off that plagued earlier versions of iOS.
» Read moreiPhone 5 audio consistent with iPhone 4S
Today, I had the opportunity to begin testing the audio input characteristics of the new iPhone 5. As seen in the plots, below, the headset input frequency response matches that of the iPhone 4S, which was presented in the previous post. The behavior of the built-in microphone also seems to match that of the iPhone 4S, suggesting that Apple kept the audio input path essentially unchanged in the new device.
» Read moreFinally! iOS 6 kills the filter on headset and mic inputs!
This exciting improvement to iOS 6 will significantly improve the quality of acoustical measurements that can be made by using the iPhone, iPad, or iPod touch without requiring a dock connector accessory for audio input.
» Read moreIOScope 2.1 exports impulse responses to AIF, CAF, or WAV audio files
IOScope 2 can now export normalized impulse response data to AIF, CAF, or WAV audio files.
» Read moreIOScope 2 adds native support for iPad and new, lower price
IOScope 2 comes with a new, lower price and offers some of the same new features which were recently added to SignalScope, SignalScope Pro and SoundMeter for iOS.
» Read moreGuitarJack Rocks 3rd Gen iPhone and iPod touch
While the GuitarJack, from Sonoma Wire Works, was obviously designed with music recording in mind, it also works well as an I/O interface for test and measurement apps, like SignalScope Pro and IOScope.
» Read more