Author: ben

Lock in lower pricing on SignalScope X subscriptions before May 11

News

SignalScope X version 13 is coming soon and it’s bringing added value to all 3 tool set tiers–Basic, Advanced, and Pro. Along with the release of the major software upgrade, the price for each monthly and annual subscription will be increasing on May 11, 2026. Any existing subscriptions will stay at their current renewal price, so if you would like to save on a subscription, make sure you have an active subscription before the 11th of May. If you already have an active subscription, you don’t need to do anything and your subscription will continue at its current lower price. The subscription pricing will change as follows: Current Subscription Pricing preserved after the change for existing subscriptions Tier Interval Price […]

» Read more
Leave a comment ,

Measured: iPhone 17 Pro microphone frequency response and directivity

Hardware, iOS, iPhone, News

Frequency Response I measured the frequency response of the iPhone 17 Pro microphone by positioning a lab-grade reference microphone (PCB model 378B02) approximately 1mm away from the phone (facing the mic) in our anechoic chamber. The reference mic was connected directly to input 1 of a model 485B39 dual channel USB interface. The iPhone microphone signal was routed directly to a USB-C to 3.5mm headphone adapter using SignalScope’s audio play through function (with measurement mode enabled) and from there to input 2 of the 485B39. The response between the 2 microphones was measured with SignalScope’s Dual FFT Analyzer (on a Mac) with the microphones facing toward and away from a loudspeaker which was generating a swept sine excitation signal. The […]

» Read more
9 comments , , , , , , , , ,

Measured: iPhone 16 Pro microphone frequency response and directivity

Hardware, iPhone

Frequency Response In order to measure the frequency response of the iPhone 16 Pro’s microphone, a lab-grade reference microphone (PCB model 378B02 1/2-inch pre-polarized free-field condenser microphone) was positioned facing the iPhone mic approximately 1mm away from the phone within our anechoic chamber. The speaker was behind the PCB mic, facing the iPhone. Both microphone signals were fed into a 485B39 USB stereo ICP signal conditioner and the response of the iPhone relative to the reference mic was measured using SignalScope’s Dual FFT Analyzer. Then, the iPhone and PCB mic were rotated 180 degrees, keeping the same orientation and position relative to each other, and the response was measured again. The 2 resulting frequency response measurements were averaged. Each averaged […]

» Read more
Leave a comment , , , , , , , , ,

Measured: iPhone 15 Pro Max microphone frequency response and directivity

Hardware, iPhone, News

In the early days of the iPhone app store, I posted frequency response measurements of some iPhone microphones, including before and after certain iOS updates. This post represents the beginning of a new effort to measure the performance characteristics of iPhone microphones. Similar to the recent post on the Vision Pro microphone, two important metrics will be frequency response (magnitude) as well as the directional response of the primary (bottom) iPhone microphone. Frequency Response In order to measure the frequency response of the iPhone’s microphone, a lab-grade reference microphone (PCB model 378B02 1/2-inch pre-polarized free-field condenser microphone) was positioned facing the iPhone mic approximately 1 mm away from it. The speaker was behind the PCB mic, facing the iPhone. Both […]

» Read more
Leave a comment , , , , , , ,

Save big on SignalScope XM for Mac

News, Uncategorized

Did you know that SignalScope XM is available as a Mac-only version of SignalScope that can be purchased directly from Faber Acoustical? SignalScope XM offers Basic, Advanced, and Pro Tool Set perpetual licenses that can be purchased directly within the app (for U.S. customers) or from a growing list of online retailers. From Labor Day through September 15, 2024, Basic and Advanced Tool Set licenses are available for 40% off the standard price! This sale only applies to SignalScope XM and is not available on SignalScope apps or subscriptions purchased through the Mac, iPhone, or iPad App Stores. Licenses purchased at the sale price will be eligible for upgrades to higher-tier tool sets. Also, since these licenses are not sold […]

» Read more
Leave a comment , , , ,

SoundMeter 12.5 includes updated app for Apple Watch

Apple Watch, iOS, iPad, iPhone, News

With the release of SoundMeter X and SoundMeter Pro 2022, version 12.5, SoundMeter’s companion app for Apple Watch has been completely re-written for better performance and improved support for newer versions of watchOS. In addition to sporting modernized software code, the SoundMeter watch app includes an interface for the Max Levels tool and adds max and peak levels to the sound level meter display. It should be noted that the SoundMeter watch app serves as a remote control for the corresponding app running on the iPhone–it doesn’t analyze or process any signals coming directly from the watch’s built-in microphone. On iPhone and iPad, SoundMeter 12.5 offers improved handling of data and audio files. On newer versions of iOS, external files […]

» Read more
Leave a comment , , , , , , ,

Measured: Apple Vision Pro microphone directivity and frequency response

Hardware, News

Since SignalScope is available on Apple Vision Pro, it is important to understand the behavior of the Vision Pro’s built-in microphone to make the most of it. Although Apple states that the Vision Pro actually has a “Six-mic array with directional beamforming,” SignalScope only has access to one of these microphones–

» Read more
2 comments , , , , , ,
1 2 3 … 14