Octave Analyzer tool for iOS
The Octave Analyzer tool for iOS performs real-time spectral analysis in whole or 1/3-octave frequency bands.
» Read moreRoomScope 1.6 automatically finds the end of the decay
In version 1.6, RoomScope’s Room Analyzer tool now estimates the optimal end point for the decay curve.
» Read moreRoomScope now loads IR data from CSV, MAT, and TXT files
RoomScope’s Room Analyzer tool can now load impulse response data from csv, txt, and MAT files saved within the app.
» Read moreSignalScope and IOScope support sample rates up to 192 kHz
Current versions of SignalScope, SignalScope Pro, and IOScope include advanced audio configuration options that support user selection of the audio sample rate. This includes sample rates as high as 192 kHz with supported hardware.
» Read moreInput triggering now available in the FFT analyzer on iOS
SignalScope 3.5 and SignalScope Pro 2.5 for iOS have arrived on the App Store with added support for input triggering in the FFT spectrum analyzer tool.
» Read morePop those balloons with RoomScope 1.3
A common request for RoomScope has been to directly capture room impulse response (IR) data using impulsive noise sources, such as balloons or starter pistols. RoomScope 1.3 now supports both single-channel and dual-channel IR data acquisition.
» Read moreRoom acoustics comes to the Mac in Electroacoustics Toolbox 3.2
Have you been looking for a tool to measure the reverberation time, early decay time, clarity and definition of a listening room, auditorium, or concert hall on your Mac? With version 3.2 of Electroacoustics Toolbox, the search has come to an end.
» Read moreRoomScope and IOScope measure longer IRs and use 64-bit FFTs
RoomScope 1.2 and IOScope 2.3 arrived in the iOS App Store this week. Both apps now support impulse response measurements up to 16 seconds long and use double precision (64-bit) FFTs in their measurements.
» Read moreSoundMeter 3.3 can turn your iPhone or iPad into a personal noise dosimeter
SoundMeter 3.3 offers users the option to add a noise dosimeter tool via in-app purchase. The new Dosimeter tool enables you to measure noise dose–the percentage of a maximum permissible daily noise exposure based on an 8-hour time period.
» Read moreFrequency Response Measurement with SignalScope Pro 3 (Mac)
Although SignalScope Pro does not include the Dual FFT Analyzer tool, found in Electroacoustics Toolbox, it is still equipped to perform basic frequency response measurements. This tutorial focuses on using SignalScope Pro’s FFT Analyzer and Signal Generator tools to measure the frequency response of your audio interface.
» Read more