Category: iPhone

Measured: iPhone 16 Pro microphone frequency response and directivity

Hardware, iPhone

Frequency Response In order to measure the frequency response of the iPhone 16 Pro’s microphone, a lab-grade reference microphone (PCB model 378B02 1/2-inch pre-polarized free-field condenser microphone) was positioned facing the iPhone mic approximately 1mm away from the phone within our anechoic chamber. The speaker was behind the PCB mic, facing the iPhone. Both microphone signals were fed into a 485B39 USB stereo ICP signal conditioner and the response of the iPhone relative to the reference mic was measured using SignalScope’s Dual FFT Analyzer. Then, the iPhone and PCB mic were rotated 180 degrees, keeping the same orientation and position relative to each other, and the response was measured again. The 2 resulting frequency response measurements were averaged. Each averaged […]

» Read more
Leave a comment , , , , , , , , ,

Measured: iPhone 15 Pro Max microphone frequency response and directivity

Hardware, iPhone, News

In the early days of the iPhone app store, I posted frequency response measurements of some iPhone microphones, including before and after certain iOS updates. This post represents the beginning of a new effort to measure the performance characteristics of iPhone microphones. Similar to the recent post on the Vision Pro microphone, two important metrics will be frequency response (magnitude) as well as the directional response of the primary (bottom) iPhone microphone. Frequency Response In order to measure the frequency response of the iPhone’s microphone, a lab-grade reference microphone (PCB model 378B02 1/2-inch pre-polarized free-field condenser microphone) was positioned facing the iPhone mic approximately 1 mm away from it. The speaker was behind the PCB mic, facing the iPhone. Both […]

» Read more
Leave a comment , , , , , , ,

SoundMeter 12.5 includes updated app for Apple Watch

Apple Watch, iOS, iPad, iPhone, News

With the release of SoundMeter X and SoundMeter Pro 2022, version 12.5, SoundMeter’s companion app for Apple Watch has been completely re-written for better performance and improved support for newer versions of watchOS. In addition to sporting modernized software code, the SoundMeter watch app includes an interface for the Max Levels tool and adds max and peak levels to the sound level meter display. It should be noted that the SoundMeter watch app serves as a remote control for the corresponding app running on the iPhone–it doesn’t analyze or process any signals coming directly from the watch’s built-in microphone. On iPhone and iPad, SoundMeter 12.5 offers improved handling of data and audio files. On newer versions of iOS, external files […]

» Read more
Leave a comment , , , , , , ,

Getting started with shortcuts in SignalScope 12.2

iPhone Tutorials, Mac Tutorials, News

With the release of version 12.2, SignalScope X and its companion apps (Basic, Advanced, and Pro 2022) now support Shortcuts on iOS/iPadOS 16+, and macOS 13+. This means that Start, Stop, and Save actions can be included in custom shortcuts created in the Shortcuts app on all 3 platforms

» Read more
Leave a comment , , , , , , , ,

Which measurement microphone should I use with iPhone, iPad, or Mac?

Hardware, iOS, iPad, iPhone, iPhone Tutorials, Mac, Mac Tutorials

“Which mic do you recommend?” The short answer is that you can connect just about any kind of microphone you want to your iPhone, iPad, or Mac through a suitable USB audio interface. The means that choosing a mic must be done with your own specific needs in mind. The suggestions below offer an answer to this question which addresses various needs and budgets.

» Read more
2 comments , , , , , , , , ,

How do I calibrate my microphone with SignalScope or SoundMeter?

Hardware, iPhone Tutorials, Mac Tutorials

If you would like to make accurate sound level measurements with your iPhone, iPad, or Mac, then proper calibration of your microphone sensitivity is an important step to success. With the right equipment, calibrating a microphone can be a very simple process.

» Read more
2 comments , , , , , , , , ,

iOS 16.1 Fixes Audio Input Identification Error

iOS, iPhone, News

As mentioned in a previous post, iOS 16.0 fails to properly identify connected external audio input hardware (the selected input was always reported to be the built-in microphone). This problem, which we reported to and confirmed with Apple, has been addressed in iOS 16.1, which now properly identifies a connected and selected audio input in Faber apps. If you’re currently running SignalScope or SoundMeter apps on iOS 16.0, an upgrade to iOS 16.1 is recommended.

» Read more
, , , , , ,
1 2 3 … 8