RoomScope now loads IR data from CSV, MAT, and TXT files
RoomScope’s Room Analyzer tool can now load impulse response data from csv, txt, and MAT files saved within the app.
» Read moreTag: test
SignalScope and IOScope support sample rates up to 192 kHz
Current versions of SignalScope, SignalScope Pro, and IOScope include advanced audio configuration options that support user selection of the audio sample rate. This includes sample rates as high as 192 kHz with supported hardware.
» Read moreInput triggering now available in the FFT analyzer on iOS
SignalScope 3.5 and SignalScope Pro 2.5 for iOS have arrived on the App Store with added support for input triggering in the FFT spectrum analyzer tool.
» Read morePop those balloons with RoomScope 1.3
A common request for RoomScope has been to directly capture room impulse response (IR) data using impulsive noise sources, such as balloons or starter pistols. RoomScope 1.3 now supports both single-channel and dual-channel IR data acquisition.
» Read moreRoom acoustics comes to the Mac in Electroacoustics Toolbox 3.2
Have you been looking for a tool to measure the reverberation time, early decay time, clarity and definition of a listening room, auditorium, or concert hall on your Mac? With version 3.2 of Electroacoustics Toolbox, the search has come to an end.
» Read moreRoomScope and IOScope measure longer IRs and use 64-bit FFTs
RoomScope 1.2 and IOScope 2.3 arrived in the iOS App Store this week. Both apps now support impulse response measurements up to 16 seconds long and use double precision (64-bit) FFTs in their measurements.
» Read moreFrequency Response Measurement with SignalScope Pro 3 (Mac)
Although SignalScope Pro does not include the Dual FFT Analyzer tool, found in Electroacoustics Toolbox, it is still equipped to perform basic frequency response measurements. This tutorial focuses on using SignalScope Pro’s FFT Analyzer and Signal Generator tools to measure the frequency response of your audio interface.
» Read moreFrequency Response Measurement with Electroacoustics Toolbox 3
One of the most powerful tools in Electroacoustics Toolbox is the Dual FFT Analyzer, which is capable of measuring system transfer functions and even indicating the quality of the measurement.
» Read moreRoomScope 1.1 offers additional detail
RoomScope version 1.1 for iOS is now available for download on the App Store.
» Read moreAre you looking for a measurement microphone for your iPhone?
Some time ago, I was made aware of the i436 measurement microphone from MicW. It looked like exactly what was needed to turn any iOS device into a quality sound level meter, or acoustical analysis tool, that you could truly carry around in your pocket, but it was limited in its utility by that pesky low-end roll-off that plagued earlier versions of iOS.
» Read more