With the advent of sound level meter apps for the iPhone OS (of which SoundMeter was the first) people began to ask, “How flat is the frequency response of the iPhone’s microphone?” Early testing indicated that the built-in microphone of the original iPhone was not a good candidate for sound level measurements, but that the iPhone’s headset microphone enjoyed a fairly flat response. Since then, additional iPhone models have arrived on the scene, each with its own set of weaknesses with respect to microphone frequency response. Additional Apple and third party headset microphones have also been introduced. At long last, some relevant frequency response measurements are presented here for the benefit of those who would really like to “see” how […]» Read more
Although I already listed some options for getting line-level audio into an iPhone or iPod touch, that list didn’t include much information that would suggest which option would be best. One important metric that people frequency ask about is frequency response. Well, I finally have some frequency response comparisons available to help answer that question. These measurements were made of various dock connector devices, attached to an iPhone 3GS. As in other frequency response measurements, the audio was routed through the iPhone, with a little help from SignalScope Pro. This means that each measurement includes the frequency response of the iPhone 3GS headphone output. The tested devices include: Tunewear Stereo Sound Recorder for iPod Alesis ProTrack Griffin iTalk Pro MacAlly […]» Read more
People often ask about the frequency response of iPhone and iPod touch audio inputs. To shed some light on the issue, I made some frequency response measurements of the iPhone, iPhone 3G, iPhone 3GS, and iPod touch 2G with Electroacoustics Toolbox and an Edirol FA-101 audio interface. These measurements are broken into two groups, one for headset input and one for dock connector input. Since measurements were made by routing audio through each iPhone OS device (by way of the Audio Play Through function built-in to SignalScope/Pro), all measurements include the frequency response of the headphone output in addition to the response of the selected input. The frequency response of the Edirol FA-101 was removed from the measurement, using a […]» Read more
Several options exist for getting audio signal into and out of iPhone OS devices via the dock connector. However, not all accessories are compatible with all iPhone OS devices. So, we put together this compatibility chart, based on our own tests with SignalScope/Pro and SignalSuite. Dock Audio Accessory Compatibility These devices were chosen for their ability to accept stereo audio input from external sources. Some dock connector devices simply feature built-in microphones, which are of limited use for test and measurement applications. It’s also important to remember that the iPhone OS automatically selects the current route for input audio signals (built-in mic, headset, dock connector, etc). iPhone iPhone 3G iPod touch iPod touch 2G Alesis ProTrack In/Out(1,2) In/Out(2) Out(3) In/Out(2) […]» Read more
Getting audio signals into and out of an iPhone OS device can sometimes be a bit tricky. The information presented below outlines the available means for getting audio signals into and out of each iPhone OS device.
Available Input Routes
Available Output Routes